Speedometer Self-diagnostics

I found this on HD Forums when I recently was having some issues with my engine light indicator on my ’05 Dyna Wide Glide coming on at high speeds (see post from my US tour trip here). This shows how you can self-diagnose the problem that the light is indicating: The speedometer is capable of displaying and clearing speedometer, tachometer, TSM/TSSM and ICM/ECM Diagnostic Trouble Codes (DTC). 1- Turn Ignition switch to OFF & Run/Stop switch is to Run. 2- Push odometer reset button in & hold. 3- Turn ignition switch to Ignition and release odometer reset button. Background lighting sould illuminate, speedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should illuminate. The word “diag” should then appear. 4 – Push the odometer reset button once and you will see the selection menu “PSSPt” with the first P flashing. 5
Continue reading...

Filming on the Tail

A short story that I forgot to mention from the tail. The camera attachment that I have for my bike tends to get some attention seeing as how it’s pretty hard to miss. So at the end, a few other bikers came over to comment, just saying how it would be a pretty cool, nausea inducing movie to watch. Then one of the guys mentioned how a few years back he filmed himself doing the tail… while holding the camera in his hand! He said he “only” shifted without the clutch twice. As if the 318 turns in 11 miles wasn’t dangerous enough!
Continue reading...